Fishes

Colorful fish

Pin
Send
Share
Send
Send


Why dream of fish?

The desire to know what will happen in the future has always been present among people. Someone uses fortune-telling for this, but you can simply interpret what they saw at night. To do this, analyze it with all the details.

Why dream of fish?

For the representatives of the beautiful half of humanity, such a dream promises good luck in relations with the opposite sex. Even this can be taken for advice that it is worth spending more time on health. Seeing fish in water means you can count on generous gifts of fate. Night vision, where you caught fish, predicts the emergence of problems and trials, for the solution of which will have to show the will and ingenuity.

Dead fish in a dream are a negative sign, foreshadowing various losses and disappointments. If the fish are in clean water, then you can count on success in business and in family relationships. Fish in the sea is a good sign, promising wealth.

Why dream of small fish?

Small fish are an omen of the approach of some significant event. Another such plot indicates that soon you will have to communicate with unpleasant people.

Why dream of colorful fish?

Such a dream warns of receiving good news. Another similar story can prophesy dramatic changes in life. For men, such a dream is an indication of a frivolous attitude to life.

Why dream of small aquarium fish?

Such a plot points to the beginning of new affairs, as well as to the opportunity to move up the career ladder or expand business.

Why dream of beautiful fish?

Such a night vision is a good sign, indicating a small but pleasant surprises and gifts. For girls, beautiful fish promise new adventures that will give a lot of energy and impressions.

colorful fish

Quote Quote Tasha92 Read your entire quote book or community!
Knit colorful fish

Author MK: Olga. Knitted little things and baby sling

Fish are small, 3-4 cm in length, depending on how thick the thread is used. In order to knit such fish, we need minimal knitting skills: to be able to knit without crochet (cbN), double crochet (cc), connecting bars (cc), increase (prib) and subtract (kill). For knitting fish I needed the following materials and tools: threads "Iris" (two colors or shades), crochet hook No. 1.25, synthetic winterizer, 2 beads for the eyes, a needle for sewing the eyes and pulling the thread, scissors.

Since the fish is small, it is important to count the loops (the change in the number of loops, even by one, will be noticeable in the proportions of the fish). We knit for both walls of the loop of the previous row.Spout and body fish knit in a circle, without lifting loops. 1 row: with a light thread, type two air loops (or do an amigurumi loop),

then in the first loop (or in the loop of amigurumi) we knit 6 columns without single crochet.

2 row: 6 single crochet.

Row 3: we increase each loop (gain) - 6 times (12). 4 row: (1 sbn, surf) - 6 times (18). 5 row: (2 sbn, surf) - 6 times (24). It turns out such a spout:

6-9 row: 24 Arb. For convenience, when knitting 6-9 rows, at the beginning of the sixth row, I use a thread from the beginning of knitting as a marker, then you can not count loops.

It turned out such a spout and body:

Then we make the reductions. 10 series: (2 sbn, kub) - 6 times (18) .11 series: (1 sbn, kub) - 6 times (12).

Fill the fish with padding polyester, slightly squeezing the sides and giving the calf shape.

12 row: 6 sbn, finish the row with a connecting bar.

Tail.13th row: With a thread of a different color, we make 2 air loops (vp) - lifting loops. I leave a long, about 40 cm, thread, which I then knit the fins. The thread does not interfere, as it is always inside the tail. We knit in each loop of the previous row of 2 sbn (12). At the end of the row knit connecting column.14 row: 3 wl (lift loops), 2 ssn in each loop (24). We finish a row with a connecting column.Row 15: we trim the tail with arches - 3 wp, then cn in the next loop,Repeat until the end of the row. Thus 24 arches are obtained.Fix and trim the working thread. You can experiment with the tail: If you want the tail to be less lush, then in the 14th row you can alternate (1 sn and 2 ssn) 6 times (18). You can tie the tail bind in the following way: 3 (or 2) VP, connecting column in the next loop, repeat to the end of the row. Then the tail will be a little shorter. You can knit two rows of arches ... In general, there are a lot of options for knitting a tail, everything depends only on your imagination.The fins.Thread left at the beginning of knitting a tail with a needle into the upper part of the head (where the upper fin will be can be determined by the shape of the spout: the nose on one side will be more “lifted up”).Knit 7-8 crochets along the back.Turn knitting and knit arches: 2 air loops, then a single crochet into the next loop. Knit to the end of the fin (7-8 arches). Then pull the thread Embed the thread in the needle and stretch it to the bottom of the fish.Knit along the belly of the fish 6-7 columns without nakida.Pull the thread, thread it into the needle and thread it through the hole at the beginning of the tail.Fold the tail and stitch it so that the sintepon was not visible (if desired, the tail can be not sewn, then it will be more magnificent). Secure the thread.Black thread to sew eyes.The fish is ready! The fish can be attached to the charm base, the brooch base, make a phone hanger, magnet, hairpins, use as a slingbus element (tie a bead), use as a counting material, material to study colors with young children, etc. I use fish as a pendant for pens and pencils (at work, such pencils and pens remain on my desktop, and not "go" to the workplaces of my colleagues).

colorful fish

Quote Quote Tasha92 Read your entire quote book or community!
Knit colorful fish

Author MK: Olga. Knitted little things and baby sling

Fish are small, 3-4 cm in length, depending on how thick the thread is used. In order to knit such fish, we need minimal knitting skills: to be able to knit without crochet (cbN), double crochet (cc), connecting bars (cc), increase (prib) and subtract (kill). For knitting fish I needed the following materials and tools: threads "Iris" (two colors or shades), crochet hook No. 1.25, synthetic winterizer, 2 beads for the eyes, a needle for sewing the eyes and pulling the thread, scissors.

Since the fish is small, it is important to count the loops (the change in the number of loops, even by one, will be noticeable in the proportions of the fish). We knit for both walls of the loop of the previous row.Spout and body fish knit in a circle, without lifting loops. 1 row: with a light thread, type two air loops (or do an amigurumi loop),

then in the first loop (or in the loop of amigurumi) we knit 6 columns without single crochet.

2 row: 6 single crochet.

Row 3: we increase each loop (gain) - 6 times (12). 4 row: (1 sbn, surf) - 6 times (18). 5 row: (2 sbn, surf) - 6 times (24). It turns out such a spout:

6-9 row: 24 Arb. For convenience, when knitting 6-9 rows, at the beginning of the sixth row, I use a thread from the beginning of knitting as a marker, then you can not count loops.

It turned out such a spout and body:

Then we make the reductions. 10 series: (2 sbn, kub) - 6 times (18) .11 series: (1 sbn, kub) - 6 times (12).

Fill the fish with padding polyester, slightly squeezing the sides and giving the calf shape.

12 row: 6 sbn, finish the row with a connecting bar.

Tail.13th row: With a thread of a different color, we make 2 air loops (vp) - lifting loops. I leave a long, about 40 cm, thread, which I then knit the fins. The thread does not interfere, as it is always inside the tail. We knit in each loop of the previous row of 2 sbn (12). At the end of the row knit connecting column.14 row: 3 wl (lift loops), 2 ssn in each loop (24). We finish a row with a connecting column.Row 15: we trim the tail with arches - 3 wp, then cn in the next loop,Repeat until the end of the row. Thus 24 arches are obtained.Fix and trim the working thread. You can experiment with the tail: If you want the tail to be less lush, then in the 14th row you can alternate (1 sn and 2 ssn) 6 times (18). You can tie the tail bind in the following way: 3 (or 2) VP, connecting column in the next loop, repeat to the end of the row. Then the tail will be a little shorter. You can knit two rows of arches ... In general, there are a lot of options for knitting a tail, everything depends only on your imagination.The fins.Thread left at the beginning of knitting a tail with a needle into the upper part of the head (where the upper fin will be can be determined by the shape of the spout: the nose on one side will be more “lifted up”).Knit 7-8 crochets along the back.Turn knitting and knit arches: 2 air loops, then a single crochet into the next loop. Knit to the end of the fin (7-8 arches). Then pull the thread Embed the thread in the needle and stretch it to the bottom of the fish.Knit along the belly of the fish 6-7 columns without nakida.Pull the thread, thread it into the needle and thread it through the hole at the beginning of the tail.Fold the tail and stitch it so that the sintepon was not visible (if desired, the tail can be not sewn, then it will be more magnificent). Secure the thread.Black thread to sew eyes.The fish is ready! The fish can be attached to the charm base, the brooch base, make a phone hanger, magnet, hairpins, use as a slingbus element (tie a bead), use as a counting material, material to study colors with young children, etc. I use fish as a pendant for pens and pencils (at work, such pencils and pens remain on my desktop, and not "go" to the workplaces of my colleagues).

Little colorful fish

Quote Quote Tasha92 Read your entire quote book or community!
Knit colorful fish

Author MK: Olga. Knitted little things and baby sling

Fish are small, 3-4 cm in length, depending on how thick the thread is used. In order to knit such fish, we need minimal knitting skills: to be able to knit without crochet (cbN), double crochet (cc), connecting bars (cc), increase (prib) and subtract (kill). For knitting fish I needed the following materials and tools: threads "Iris" (two colors or shades), crochet hook No. 1.25, synthetic winterizer, 2 beads for the eyes, a needle for sewing the eyes and pulling the thread, scissors.

Since the fish is small, it is important to count the loops (the change in the number of loops, even by one, will be noticeable in the proportions of the fish). We knit for both walls of the loop of the previous row.Spout and body fish knit in a circle, without lifting loops. 1 row: with a light thread, type two air loops (or do an amigurumi loop),

then in the first loop (or in the loop of amigurumi) we knit 6 columns without single crochet.

2 row: 6 single crochet.

Row 3: we increase each loop (gain) - 6 times (12). 4 row: (1 sbn, surf) - 6 times (18). 5 row: (2 sbn, surf) - 6 times (24). It turns out such a spout:

6-9 row: 24 Arb. For convenience, when knitting 6-9 rows, at the beginning of the sixth row, I use a thread from the beginning of knitting as a marker, then you can not count loops.

It turned out such a spout and body:

Then we make the reductions. 10 series: (2 sbn, kub) - 6 times (18) .11 series: (1 sbn, kub) - 6 times (12).

Fill the fish with padding polyester, slightly squeezing the sides and giving the calf shape.

12 row: 6 sbn, finish the row with a connecting bar.

Tail.13th row: With a thread of a different color, we make 2 air loops (vp) - lifting loops. I leave a long, about 40 cm, thread, which I then knit the fins. The thread does not interfere, as it is always inside the tail. We knit in each loop of the previous row of 2 sbn (12). At the end of the row knit connecting column.14 row: 3 wl (lift loops), 2 ssn in each loop (24). We finish a row with a connecting column.Row 15: we trim the tail with arches - 3 wp, then cn in the next loop,Repeat until the end of the row. Thus 24 arches are obtained.Fix and trim the working thread. You can experiment with the tail: If you want the tail to be less lush, then in the 14th row you can alternate (1 sn and 2 ssn) 6 times (18). You can tie the tail bind in the following way: 3 (or 2) VP, connecting column in the next loop, repeat to the end of the row. Then the tail will be a little shorter. You can knit two rows of arches ... In general, there are a lot of options for knitting a tail, everything depends only on your imagination.The fins.Thread left at the beginning of knitting a tail with a needle into the upper part of the head (where the upper fin will be can be determined by the shape of the spout: the nose on one side will be more “lifted up”).Knit 7-8 crochets along the back.Turn knitting and knit arches: 2 air loops, then a single crochet into the next loop. Knit to the end of the fin (7-8 arches). Then pull the thread Embed the thread in the needle and stretch it to the bottom of the fish.Knit along the belly of the fish 6-7 columns without nakida.Pull the thread, thread it into the needle and thread it through the hole at the beginning of the tail.Fold the tail and stitch it so that the sintepon was not visible (if desired, the tail can be not sewn, then it will be more magnificent). Secure the thread.Black thread to sew eyes.The fish is ready! The fish can be attached to the charm base, the brooch base, make a phone hanger, magnet, hairpins, use as a slingbus element (tie a bead), use as a counting material, material to study colors with young children, etc. I use fish as a pendant for pens and pencils (at work, such pencils and pens remain on my desktop, and not "go" to the workplaces of my colleagues).

Colorful beaded fish

Quote of the message Лилёк_Мотылёк Read your entire quote book or community!
Colorful beaded fish

A source

Fish are small, 3-4 cm in length, depending on how thick the thread is used. In order to knit such fish, we need minimal knitting skills: to be able to knit without crochet (cbN), double crochet (cc), connecting bars (cc), increase (prib) and subtract (kill). For knitting fish I needed the following materials and tools: threads "Iris" (two colors or shades), crochet hook No. 1.25, synthetic winterizer, 2 beads for the eyes, a needle for sewing the eyes and pulling the thread, scissors.

Since the fish is small, it is important to count the loops (the change in the number of loops, even by one, will be noticeable in the proportions of the fish). We knit for both walls of the loop of the previous row.Spout and body fish knit in a circle, without lifting loops. 1 row: with a light thread, type two air loops (or do an amigurumi loop),

then in the first loop (or in the loop of amigurumi) we knit 6 columns without single crochet.

2 row: 6 single crochet.

Row 3: we increase each loop (gain) - 6 times (12). 4 row: (1 sbn, surf) - 6 times (18). 5 row: (2 sbn, surf) - 6 times (24). It turns out such a spout:

6-9 row: 24 Arb. For convenience, when knitting 6-9 rows, at the beginning of the sixth row, I use a thread from the beginning of knitting as a marker, then you can not count loops.

It turned out such a spout and body:

Then we make the reductions. 10 series: (2 sbn, kub) - 6 times (18) .11 series: (1 sbn, kub) - 6 times (12).

Fill the fish with padding polyester, slightly squeezing the sides and giving the calf shape.

12 row: 6 sbn, finish the row with a connecting bar.

Tail.13th row: With a thread of a different color, we make 2 air loops (vp) - lifting loops. I leave a long, about 40 cm, thread, which I then knit the fins. The thread does not interfere, as it is always inside the tail. We knit in each loop of the previous row of 2 sbn (12). At the end of the row knit connecting column.14 row: 3 wl (lift loops), 2 ssn in each loop (24). We finish a row with a connecting column.Row 15: we trim the tail with arches - 3 wp, then cn in the next loop,Repeat until the end of the row. Thus 24 arches are obtained.Fix and trim the working thread. You can experiment with the tail: If you want the tail to be less lush, then in the 14th row you can alternate (1 sn and 2 ssn) 6 times (18). You can tie the tail bind in the following way: 3 (or 2) VP, connecting column in the next loop, repeat to the end of the row. Then the tail will be a little shorter. You can knit two rows of arches ... In general, there are a lot of options for knitting a tail, everything depends only on your imagination.The fins.Thread left at the beginning of knitting a tail with a needle into the upper part of the head (where the upper fin will be can be determined by the shape of the spout: the nose on one side will be more “pulled up”).Knit 7-8 crochets along the back.Turn knitting and knit arches: 2 air loops, then a single crochet into the next loop. Knit to the end of the fin (7-8 arches). Then pull the thread Embed the thread in the needle and stretch it to the bottom of the fish.Knit along the belly of the fish 6-7 columns without nakida.Pull the thread, thread it into the needle and thread it through the hole at the beginning of the tail.Fold the tail and stitch it so that the sintepon was not visible (if desired, the tail can be not stitched, then it will be more magnificent). Secure the thread.Black thread to sew eyes.Рыбка готова!Рыбку можно прикрепить на основу для брелока, основу для брошки, сделать подвеску для телефона, магнит, заколочки, использовать как элемент для слингобус (обвязать бусину), использовать как счетный материал, материал для изучения цветов маленькими детьми и т.д. Я использую рыбок как подвеску на ручки и карандаши (на работе такие карандаши и ручки остаются на моем рабочем столе, а не "уходят" на рабочие места моих коллег).

Вяжем разноцветных рыбок

Вяжем разноцветных рыбок

Автор Ольга. Вязаные мелочи и слингобусы

Хочу поделиться с вами тем, как я вяжу разноцветных рыбок. Рыбки получаются небольшие, 3-4 см в длину, в зависимости от того, какой толщины нитки используются. In order to knit such fish, we need minimal knitting skills: to be able to knit without crochet (cbN), double crochet (cc), connecting bars (cc), increase (prib) and subtract (kill).

For knitting fish I needed the following materials and tools: threads "Iris" (two colors or shades), crochet hook No. 1.25, synthetic winterizer, 2 beads for the eyes, a needle for sewing the eyes and pulling the thread, scissors.

Since the fish is small, it is important to count the loops (the change in the number of loops, even by one, will be noticeable in the proportions of the fish).

We knit for both walls of the loop of the previous row.

Knit the nose and body of the fish in a circle, without lifting loops.

1 row: with a light thread, type two air loops (or do an amigurumi loop),

then in the first loop (or in the loop of amigurumi) we knit 6 columns without single crochet.

2 row: 6 single crochet.

Row 3: we increase each loop (gain) - 6 times (12).

4 row: (1 sbn, surf) - 6 times (18).

5 row: (2 sbn, surf) - 6 times (24). It turns out such a spout:

6-9 row: 24 Arb. For convenience, when knitting 6-9 rows, at the beginning of the sixth row, I use a thread from the beginning of knitting as a marker, then you can not count loops.

It turned out such a spout and body:

Then do the downs.

10 row: (2 sb, u) - 6 times (18).

11th row: (1 sbn, ub) - 6 times (12).

Fill the fish with padding polyester, slightly squeezing the sides and giving the calf shape.

12 row: 6 sbn, finish the row with a connecting bar.

Tail.

13th row: With a thread of a different color, we make 2 air loops (VP) - lifting loops.

I leave a long, about 40 cm, thread, which then knit fins. The thread does not interfere, as it is always inside the tail.

We knit in each loop of the previous row of 2 sbn (12). At the end of the row knit connecting column.

14 row: 3 wl (lift loops), 2 ssn in each loop (24). We finish a row with a connecting column.

Row 15: we trim the tail with arches - 3 wp, then cn in the next loop,

Repeat until the end of the row. Thus 24 arches are obtained.

Secure and trim the working thread.

With a tail you can experiment:

If you want the tail to be less lush, then in the 14th row you can alternate (1 ssn and 2 ssn) - 6 times (18).

Tail binding can be done in the following way: 3 (or 2) in, connecting column in the next loop, repeat to the end of the row. Then the tail will be a little shorter.

You can knit two rows of arches ...

In general, there are a lot of options for knitting a tail, everything depends only on your imagination.

The fins.

Thread left at the beginning of knitting a tail with a needle into the upper part of the head (where the upper fin will be can be determined by the shape of the spout: the nose on one side will be more “lifted up”).

Knit 7-8 crochets along the back.

Turn knitting and knit arches: 2 air loops, then a single crochet into the next loop.

Knit to the end of the fin (7-8 arches). Then pull the thread

Embed the thread in the needle and stretch it to the bottom of the fish.

Knit along the belly of the fish 6-7 columns without nakida.

Pull the thread, thread it into the needle and thread it through the hole at the beginning of the tail.

Fold the tail and stitch it so that the sintepon was not visible (if desired, the tail can be not stitched, then it will be more magnificent). Secure the thread.

Black thread to sew eyes.

Fish is ready!

The fish can be attached to the charm base, the brooch base, a telephone pendant, a magnet, hairpins, used as a slingbus element (to tie a bead), used as a counting material, material for studying flowers by young children, etc. I use fish as a pendant for pens and pencils (at work, such pencils and pens remain on my desktop, and not "go" to the workplaces of my colleagues).


A source

Knit colorful fish

Quote Quote Tasha92 Read your entire quote book or community!

Author MK: Olga. Knitted little things and baby sling

Fish are small, 3-4 cm in length, depending on how thick the thread is used. In order to knit such fish, we need minimal knitting skills: to be able to knit without crochet (cbN), double crochet (cc), connecting bars (cc), increase (prib) and subtract (kill). For knitting fish I needed the following materials and tools: threads "Iris" (two colors or shades), crochet hook No. 1.25, synthetic winterizer, 2 beads for the eyes, a needle for sewing the eyes and pulling the thread, scissors.

Since the fish is small, it is important to count the loops (the change in the number of loops, even by one, will be noticeable in the proportions of the fish). We knit for both walls of the loop of the previous row.Spout and body fish knit in a circle, without lifting loops. 1 row: with a light thread, type two air loops (or do an amigurumi loop),

then in the first loop (or in the loop of amigurumi) we knit 6 columns without single crochet.

2 row: 6 single crochet.

Row 3: we increase each loop (gain) - 6 times (12). 4 row: (1 sbn, surf) - 6 times (18). 5 row: (2 sbn, surf) - 6 times (24). It turns out such a spout:

6-9 row: 24 Arb. For convenience, when knitting 6-9 rows, at the beginning of the sixth row, I use a thread from the beginning of knitting as a marker, then you can not count loops.

It turned out such a spout and body:

Then we make the reductions. 10 series: (2 sbn, kub) - 6 times (18) .11 series: (1 sbn, kub) - 6 times (12).

Fill the fish with padding polyester, slightly squeezing the sides and giving the calf shape.

12 row: 6 sbn, finish the row with a connecting bar.

Tail.13th row: With a thread of a different color, we make 2 air loops (vp) - lifting loops. I leave a long, about 40 cm, thread, which I then knit the fins. The thread does not interfere, as it is always inside the tail. We knit in each loop of the previous row of 2 sbn (12). At the end of the row knit connecting column.14 row: 3 wl (lift loops), 2 ssn in each loop (24). We finish a row with a connecting column.Row 15: we trim the tail with arches - 3 wp, then cn in the next loop,Repeat until the end of the row. Thus 24 arches are obtained.Fix and trim the working thread. You can experiment with the tail: If you want the tail to be less lush, then in the 14th row you can alternate (1 sn and 2 ssn) 6 times (18). You can tie the tail bind in the following way: 3 (or 2) VP, connecting column in the next loop, repeat to the end of the row. Then the tail will be a little shorter. You can knit two rows of arches ... In general, there are a lot of options for knitting a tail, everything depends only on your imagination.The fins.Thread left at the beginning of knitting a tail with a needle into the upper part of the head (where the upper fin will be can be determined by the shape of the spout: the nose on one side will be more “lifted up”).Knit 7-8 crochets along the back.Turn knitting and knit arches: 2 air loops, then a single crochet into the next loop. Knit to the end of the fin (7-8 arches). Then pull the thread Embed the thread in the needle and stretch it to the bottom of the fish.Knit along the belly of the fish 6-7 columns without nakida.Pull the thread, thread it into the needle and thread it through the hole at the beginning of the tail.Fold the tail and stitch it so that the sintepon was not visible (if desired, the tail can be not stitched, then it will be more magnificent). Secure the thread.Black thread to sew eyes.The fish is ready! The fish can be attached to the charm base, the brooch base, make a phone hanger, magnet, hairpins, use as a slingbus element (tie a bead), use as a counting material, material to study colors with young children, etc. I use fish as a pendant for pens and pencils (at work, such pencils and pens remain on my desktop, and not "go" to the workplaces of my colleagues).

Knit crochet colorful fish.

Quote Quote Tasha92 Read your entire quote book or community!

Author MK: Olga. Knitted little things and baby sling

Fish are small, 3-4 cm in length, depending on how thick the thread is used. In order to knit such fish, we need minimal knitting skills: to be able to knit without crochet (cbN), double crochet (cc), connecting bars (cc), increase (prib) and subtract (kill). For knitting fish I needed the following materials and tools: threads "Iris" (two colors or shades), crochet hook No. 1.25, synthetic winterizer, 2 beads for the eyes, a needle for sewing the eyes and pulling the thread, scissors.

Since the fish is small, it is important to count the loops (the change in the number of loops, even by one, will be noticeable in the proportions of the fish). We knit for both walls of the loop of the previous row.Spout and body fish knit in a circle, without lifting loops. 1 row: with a light thread, type two air loops (or do an amigurumi loop),

then in the first loop (or in the loop of amigurumi) we knit 6 columns without single crochet.

2 row: 6 single crochet.

Row 3: we increase each loop (gain) - 6 times (12). 4 row: (1 sbn, surf) - 6 times (18). 5 row: (2 sbn, surf) - 6 times (24). It turns out such a spout:

6-9 row: 24 Arb. For convenience, when knitting 6-9 rows, at the beginning of the sixth row, I use a thread from the beginning of knitting as a marker, then you can not count loops.

It turned out such a spout and body:

Then we make the reductions. 10 series: (2 sbn, kub) - 6 times (18) .11 series: (1 sbn, kub) - 6 times (12).

Fill the fish with padding polyester, slightly squeezing the sides and giving the calf shape.

12 row: 6 sbn, finish the row with a connecting bar.

Tail.13th row: With a thread of a different color, we make 2 air loops (vp) - lifting loops. I leave a long, about 40 cm, thread, which I then knit the fins. The thread does not interfere, as it is always inside the tail. We knit in each loop of the previous row of 2 sbn (12). At the end of the row knit connecting column.14 row: 3 wl (lift loops), 2 ssn in each loop (24). We finish a row with a connecting column.Row 15: we trim the tail with arches - 3 wp, then cn in the next loop,Repeat until the end of the row. Thus 24 arches are obtained.Fix and trim the working thread. You can experiment with the tail: If you want the tail to be less lush, then in the 14th row you can alternate (1 sn and 2 ssn) 6 times (18). You can tie the tail bind in the following way: 3 (or 2) VP, connecting column in the next loop, repeat to the end of the row. Then the tail will be a little shorter. You can knit two rows of arches ... In general, there are a lot of options for knitting a tail, everything depends only on your imagination.The fins.Thread left at the beginning of knitting a tail with a needle into the upper part of the head (where the upper fin will be can be determined by the shape of the spout: the nose on one side will be more “lifted up”).Knit 7-8 crochets along the back.Turn knitting and knit arches: 2 air loops, then a single crochet into the next loop. Knit to the end of the fin (7-8 arches). Then pull the thread Embed the thread in the needle and stretch it to the bottom of the fish.Knit along the belly of the fish 6-7 columns without nakida.Pull the thread, thread it into the needle and thread it through the hole at the beginning of the tail.Fold the tail and stitch it so that the sintepon was not visible (if desired, the tail can be not stitched, then it will be more magnificent). Secure the thread.Black thread to sew eyes.The fish is ready! The fish can be attached to the charm base, the brooch base, make a phone hanger, magnet, hairpins, use as a slingbus element (tie a bead), use as a counting material, material to study colors with young children, etc. I use fish as a pendant for pens and pencils (at work, such pencils and pens remain on my desktop, and not "go" to the workplaces of my colleagues).

Colorful fish

Fish beautiful bright multi-colored pattern.

Quote Post Lana's organs is Berg Read your entire quote book or community!

Fish beautiful bright multi-colored pattern.

Beautiful bright multi-colored fish with a pattern ...

source //blog.sina.com.cn/u/2307719615

1.

2.

3.

4.

5.

6.

7.

8.

9.
Full MK can be found HERE

Pin
Send
Share
Send
Send