Questions

How to determine the volume of the aquarium in liters

Pin
Send
Share
Send
Send


How to calculate aquarium volume :: aquarium volume calculator :: Equipment and accessories

Tip 1: How to calculate the volume of the aquarium

Volume of your aquarium - This is the starting point for a dozen calculations. The type and quantity of fish and plants, the filter and heater characteristics, the dosage of medicines and fertilizers necessary for the successful functioning of your home ecosystem depend on the volume. How often beginner aquarists are guided by the figure indicated in the factory characteristics of the reservoir and are mistaken, sometimes irreparably for their pets. If you want to turn your aquarium into a real underwater kingdom, you will have to start with mathematics.

You will need

  • - roulette
  • - pencil and paper
  • - calculator

Instruction

1. If your tank is a parallelogram, you need to measure its width, depth and length from the outside and record these values.

2. Now you have to calculate the internal dimensions. To do this, measure the thickness of the tank wall, multiply by two and subtract the resulting figure from each measurement. For example, wall thickness aquarium 0.5 centimeters. You need to subtract a centimeter from the outer length to find the inner length.

3. Translate centimeters to meters and calculate the volume aquariumusing internal measurements. Multiply the length by the width and height, and you get the volume in cubic meters.

4. Now convert cubic meters to liters. In one cubic meter one thousand liters.

5. Take a standard 50 liter aquarium with a wall thickness of 0.5 centimeters and the following external dimensions of 54x27x35 centimeters. Its internal dimensions will be equal to 53x26x34 centimeters. We subtracted 1 centimeter from each measurement, the wall thickness aquariummultiplied by two. Its volume in cubic meters will be 0.54 x 0.26 x 0.35 = 0.0491 centimeters or 49 liters.

6. It would seem that the difference of 1 liter is not so significant, but this volume corresponds to the amount of water poured into the aquarium to the very edges and only if there is nothing else in the tank. If we do not add water to the edge aquarium at 3 centimeters, then it is still 0.5 liters less water. How do we know this? Multiplying the bottom area by the height from the water surface to the edge aquarium, that is, 0.54 x 0.29 x 0.03 and converting the resulting figure - 0.0042 - from cubic centimeters to liters.

7. Now you can take about a liter of water per volume occupied by the filter and heater. And somewhere in 0.5 liters of snags or other decorative ornaments. And do not forget the algae. But there is still ground! 2 centimeters of basalt crumb will take about 0.8 liters of the total volume. Thus, your 50-liter aquarium actually holds about 47 liters. And the larger the aquarium, the more noticeable the difference between the declared volume and the real one.

Tip 2: How to calculate the volume of the aquarium

An aquarium in a house is not only very beautiful. It has been proven that observing the underwater life calms the nerves, improves mood and puts thoughts in order. But in order that the underwater life not only looks harmonious, but also does not cause inconvenience to underwater inhabitants, it is necessary to create comfortable conditions for them, namely, to choose the right size. aquarium.

You will need

  • calculator or the ability to count in the mind, aquarium scenery and soil, fish

Instruction

1. First, think carefully about which fish you plan to place in the aquarium. It should not be very closely, otherwise internal wars are inevitable and, as a result, the death of tenants. And this is not what you want to put the aquarium. Therefore, it is necessary to know how much internal space this or that individual requires. As a rule, a peaceful small fish of medium size (5-8 cm) requires 10-15 liters. Accordingly, the larger the fish and the more aggressive it is, the more space it needs to get along peacefully with its neighbors.

2. Decide which interior decorations you want to place, which plants in which soil you plant.
We must not forget that the scenery, plants and soil occupy a certain amount of internal space of the aquarium. The thickness of the soil layer depends on the size of its particles and ranges from 3 to 8 centimeters. That is, the larger the particles, the thicker the soil should be in the aquarium. The background can also be voluminous (although more often it is not), so do not forget to take this into account.

3. Taking into account all the selected positions, calculate the volume of aquarium you need. As a rule, the volume is already indicated in the stores, and with the purchase you will know for sure whether this or that aquarium will suit you. But if you do not know exactly the volume of this particular aquarium, it can be calculated by the formula. To do this, multiply the length, depth and height of the aquarium in centimeters. We get the volume in centimeters cubic. This value must be multiplied by 0.001 to get liters. By choosing the right aquarium, you can create a beautiful corner in your own home and ensure a joyful happy life for its inhabitants.

Related videos

Related videos

note

If you want to achieve perfect accuracy in calculations, it is worth remembering that the proportion of basalt crumb, quartz, river sand is different.

Helpful advice

In the network there are a large number of links to various aquarium calculators online. They allow you to calculate the volume of your aquarium and the weight of the soil necessary for its proper functioning.

❶ How to determine the volume of the aquarium :: Apartment and Cottage :: Other

How to determine the volume of the aquarium

The guidelines for breeding aquarium fish usually indicate how many liters of water are needed per pair. There are species of fish that will never grow to their normal size in a small vessel. For some guests too tight "house" can be disastrous. Therefore, the volume of the aquarium must be calculated in advance. You need to know it in the event that the fish are sick. Doses of drugs are also calculated on the volume.

The question "how to restore the certificate of registration of ownership of 1/4 apartments, the type of registered right is a common share ownership" - 1 answer

You will need

  • - ruler, tape measure or measuring tape;
  • - measuring vessel;
  • - calculator.

Instruction

1. Decide which volume you need - geometric or actual. The first is calculated in the same way as the volume of a geometric body of the corresponding form. Measure the length, width and height of the aquarium and multiply them. For measurements it is most convenient to use a tape measure or a measuring tape. This method has several drawbacks. Thus it is convenient to calculate the parameters of a rectangular or square vessel. But modern aquariums have the most bizarre form, and this method is not always suitable. In addition, water to the brim in the aquarium is never poured. And there are stones and shelters for some fish, and they also take volume.

2. Get measured dishes. You will need it in the future. This can be a vessel with tick marks or even an ordinary bucket or can, the volume of which you know. Measuring vessel allows you to determine the volume more accurately. Before settling the fish, you will still fill the aquarium with water. In many cases, this needs to be done several times. For example, when testing a homemade aquarium for tightness. But it is more convenient to calculate the volume immediately before settling the fish, when you have already processed the soil, stones and decorative elements.

3. Place the soil, shelter and bulk jewelry. You can put on one of the walls mark, to which you will pour water. Type water into the measuring dish and gently pour it into the aquarium. Fill your reservoir to the desired level, not forgetting to count how many times you have emptied the measuring vessel. Multiply its volume by the number of times. The advantage of this method is that it allows you to accurately calculate the volume of water in a vessel of any shape.

note

Usually the volume of the aquarium is determined in liters, so it may be necessary to convert the units of measurement, if suddenly there are other data on the measuring dish. In the international system, these are cubic meters or cubic centimeters. Use the table of units of measurement of physical quantities. Pints ​​or cubic inches can stand on English or American dishes. Such measuring vessels are not found every day, but sometimes they come across. The very method of calculating the volume of this does not change. Calculate the number of units and translate it into the international system using a table and a calculator.

Helpful advice

If the aquarium is very large, take a bucket as a measuring dish. You can pre-determine its exact volume using the same measuring utensils. Mark the height you poured

What is an aquarium calculator?

Sooner or later, many aquarists visit the idea of ​​replacing their home pond with a more spacious one, or a more interesting and original one. There may be several options here: buy ready-made, order from a professional master or do it yourself. For those who like to experiment and "work with their hands," it is very important to think over everything in advance and calculate that the self-made aquarium will last a long time, and not fall apart in a day, creating a lot of problems for the owner. To help the craftsmen was created aquarium calculator. Let's understand what it is and why it is needed.

Calculator: what is, for what, what are

Calculators are called electronic computing devices, replacing mechanical and performing operations on numbers and algebraic formulas.

Among them are specialized, performing calculations in one very narrow sphere. This is also an aquarium calculator. What can be calculated with it:

  • glass thickness;
  • water volume;
  • soil volume and mass;
  • amount of fertilizer;
  • lighting power;
  • heater power;
  • carbon dioxide content;
  • fish landing density.

There are calculators for rectangular, cubic, angular, panoramic, cylinder aquariums.

Why glass thickness is important for aquarium

This indicator is in the first place for a reason. After determining the dimensions of the aquarium, the next step is to select the glass of the "correct" thickness.

  • Too thin can not be: it will burst, the water will flood the neighbors, and all the fish will die.
  • Too thick does not make sense either: it will make the structure heavier, reduce transparency and “hit the price”, because glass is about a third of the cost of an aquarium.
Yes, and the glasses themselves come in different brands and from various materials (acrylic, silicate, special hot, etc.). And for everyone there is a standard thickness.

How to calculate the thickness of the glass for the aquarium

Usually for making

  • 5-30-liter aquariums take 4mm glass;
  • 30-80-liter - 5 mm;
  • 80-150-liter - 6 mm;
  • 150-220-liter - 8 mm;
  • 220-300-liter - 1 cm.

However, if the aquarium is non-standard (high, narrow, irregular shape), then this rule needs to be amended.

The quality of the glass is also affected. For example, you cannot use old window or display windows. They have sags, blotches of bubbles, fatty film on the surface, and can also be damaged by welding and just age.

If you plan to make an aquarium that looks like a store, then you can simply measure the thickness of the glasses and add 1-2 mm. If there are no analogues in the store, then special formulas for calculating the strength of glasses will help. Required data on the height, width, depth of the aquarium and the strength of the glass.

The disadvantages of these formulas are: any errors lead to strange results, and the tensile strength of the glass is often unknown.

Calculation of glass thickness for aquarium: a table that can help

It is not necessary to create difficulties for yourself from scratch. Experts have long calculated the thickness of the usual glass for the aquarium and tabulated the results in the table. Here is a well-reviewed table with many reviews, you can take note:

Stiffeners and screeds increase the strength of the aquarium. These are strips of glass about 2.5 cm wide, additionally glued from above flat to the front and rear walls, relieving tension and cleaning deflections from them. For long aquariums, they are simply necessary.

It is not necessary to use this particular plate, there are many others, both general and separate for the bottom and walls.

The most "advanced" option is to calculate the thickness of the glasses on an aquarium calculator. This is not only very convenient, but also correct! After all, not all ordinary aquarists can understand the accumulation of complex formulas that go beyond the average knowledge, and even calculate everything on paper, not to mention “in mind”.

The developers note that the calculation is made with substantial reserves. And if suddenly as a result you get zero, then it is recommended to contact the experts with this question.

Aquarium calculator significantly simplifies life - entered the data, pressed the button, got the result! And in conclusion we say: no matter how you use it, do not be lazy to double-check the results, because it is better to spend more time on calculations and checking than on repairs and rework.

How to calculate the volume in liters :: how to calculate the number of liters in the tank :: Natural Sciences

How to calculate the volume in liters

Any liquid container, such as a can or water bottle, has a certain amount that is measured in liters. However, there are cases when the volume is known in cubic meters. In this case, you need to be able to translate meters into liters.

The question "And yet! What appeared first?" Egg or chicken? "" - 12 answers

Instruction

1. There are several ways to calculate volume in liters. If you encounter a liquid that is packaged in a bottle, then there is always this volume indicated in liters. However, there are containers on which the volume is indicated in cubic meters. From primary school it is known that in 1 m ^ 3 = 1000 l. Accordingly, if you need to find the volume of any capacity in liters, you must multiply the specified value in cubic meters by 1/1000: a (l) = b (m ^ 3) * 0.001. Thus, you can calculate the volume in liters for a given volume, measured in m ^ 3. This is a simple translation from one SI unit of measurement to another. However, if you do not yet know the volume, you will need to first find it in meters, and then translate into liters.

2. Suppose you know only the mass of the liquid in the container. With the help of a simple formula, which is known from the school physics course, one can find the volume. The formula itself looks like this: p = m / V, where m is the mass of the liquid, p is the density of the liquid. You can find the density of the liquid based on the tabular data. In all physics textbooks, the densities of liquids are given, including water, oil, kerosene, mercury, etc. Accordingly, the volume is equal to: V = m / p (m ^ 3). Further, also according to the scheme, V (l) = V (m ^ 3) * 0.001.

3. If you know neither volume nor tare mass, but it is a clear stereometric figure, for example, a cylinder, the volume can be found in two stages: first you need to carry out experimental measurements, and then - algebraic calculations. To do this, you need to measure the radius of the base of the cylindrical container and its height. The volume of such a container will be equal to: V = πR ^ 2 * H, where R is the radius of the base of the container, H is the height (m ^ 3). Similarly, V (l) = V (m ^ 3) * 0.001.

How to find volume, if length, height, width are known :: find out the volume of a figure :: Mathematics

Tip 1: How to find the volume, if you know the length, height, width

Length, width, height - these are the parameters that characterize the parallelepiped. The parallelepiped itself is a three-dimensional shape, whose faces are parallelograms. It is enough to know these parameters to calculate the volume of the shape.

Question "How to determine the volume of the pipe? If its length is 200m and the diameter is 65mm." - 3 replies

You will need

  • Calculator.

Instruction

1. You must first make a reservation. The length, width, and height are parameters that are sufficient for calculating the volume of only a rectangular parallelepiped. By a rectangular parallelepiped is meant a figure in which all faces are formed by rectangles that form right angles between themselves. This means that in a rectangular parallelepiped, the opposite faces are equal and parallel.

2. Now, having figured out in which case the parameters of the parallelepiped can be used as the source data, we can proceed to the calculation of its volume. Volume is a measure characterizing the amount of space occupied by an object. In order to calculate the volume of the parallelepiped, it is necessary to multiply one another all its parameters: length, width and height. The formula can be expressed as:
V = a * b * c, where a, b and c are parameters.

3. For greater clarity, you can consider an example:
There is a rectangular parallelepiped, the base area of ​​which is 42 cm², and its height is 15 cm, it is required to find the volume of the original figure.
To solve the problem, it should be noted that of all the parameters, only height is known. But the area of ​​the base is given, which is multiplied by the length and width of the rectangle. From the above formula we can conclude that the area of ​​the base is a * b cm², then the volume of a rectangular parallelepiped can be found as follows:
42 * 15 = 630 cm³
Answer: the volume of the figure will be 630 cm³

Tip 2: How to find the length of the volume and width

In life you have to deal with problems when you need to calculate the volume, the length or the width of an object without knowing all its dimensions. This can be an aquarium, table or box. What if there is no roulette at hand or the object is in a place where you can’t get close to the ruler?

You will need

  • Pencil paper.

Instruction

1. Imagine that we have a certain capacity, for example, an aquarium located in a wall niche, the depth of which we need to establish. The volume of the aquarium is known and is 140 liters. The length of one of its sides is also known: 70 cm. For simplicity, we denote the faces of the aquarium with the Latin letters x, y and z. Solve the problem should be through an equation with two unknowns.And you most likely will not receive exact value of length. In any case, it is necessary to evaluate the reliability of the result obtained "by eye".

2. In order to operate with one unit of measurement, we will translate the volume into cubic centimeters. It is known that 1 liter of water is 1000 cm3. It turns out that the volume of our aquarium will be 140,000 cubic centimeters. It is known that the volume is a multiplication of length, width and height. As a result, we get the simplest equation: x * y * z = 140000 Set the already known length of the face x = 70 cm from the input to this equation: 70 * y * z = 140000. Turning it to find the necessary parameters, we get: y * z = 140,000 / 70, or y * z = 2000

3. Actually, now the assumption stage begins. We already know that the product of length and height is 2000 square centimeters. Reverse the equation again: y = 2000 / z In order to find y, we will have to at least approximately determine z. In the case of an aquarium, it is most reasonable to assume that z is an integer number, and probably even. For z = 30, y ~ 66.6 cm.
With z = 40, y = 50 cm.
With z = 50, y = 40 cm.
With z = 60, y ~ 33.3 cm.
With z = 70, y ~ 28.6 cm. These are the most likely numbers. There is also the possibility that the length and height are equal, then they are found by extracting the square root of the area. In this case = y = 44.72 cm.

note

In broad interpretation, the parallelepiped is a prism with a parallelogram at its base. There are several variations of this figure, among which, besides a rectangular parallelepiped, are:
- A straight parallelepiped whose side faces are rectangles;
- Inclined parallelepiped, in which the side faces are not perpendicular to the base;
- A cube is a special kind of this type of shape, because all its faces are squares. When they intersect, they form right angles, and the opposite faces are parallel to each other, which means that the cube is a special case of a rectangular parallelepiped

How to calculate the volume in liters :: volume converted to liters :: Math

How to calculate the volume in liters

To calculate the volume of a body or substance in liters, you need to know its volume, expressed in other units. If the volume of the body is not known in advance, then it can be calculated in terms of mass and density. There are special methods and tools for measuring mass and density.

Question "How to determine the volume of the pipe? If its length is 200m and the diameter is 65mm." - 3 replies

You will need

  • calculator, scales, substance density tables

Instruction

1. If the volume is specified in cubic decimeters (dm³), then the volume in liters expressed by the same number. Therefore, simply change the unit dm³ per liter (l).
Vl = Vdm³To convert to liters of volume specified in cubic meters (m³), multiply the specified numerical value by 1000.
Vl = Vm³ * 1000To convert to liters the volume specified in centimeters cubic (cm³) or milliliters (ml), divide the given numeric value by 1000.
Vl = Vcm³ / 1000 = Vml / 1000. To calculate the volume in litersif it is set to the deckliters (long) or buckets, multiply the number of decalitres by 10:
Vl = Vdl * 10

2. If the volume is given in non-metric units of measurement (national or household), use the following instruction: If the unit of measurement of a known volume is an American gallon, then to calculate the volume in liters, multiply it by 3,7854. Do the same with other units of volume: American Quart - multiply by 0.9464;
US gallon - 3.7854;
American dry barrel - 115.6270;
American Bushel - 35.2391;
American liquid barrel - 119,2400;
oil barrel - 158.9873;
Imperial gallon - 4.5461;
Imperial Quart - 1.1365;
Imperial Pint - 0.5683;
Imperial ounce - 0.0284;
American pint - 0.4732;
US ounce - 0.0296;
imperial bushel - 36.3687;
teaspoon - 0.005;
tablespoon - 0.0148;
a mug - 1.23 (conditionally);
cup - 0,2;
cubic inch - 0,0164;
cubic feet - 28,3168.

3. If the volume of the body or fluid is unknown, then calculate it using the following formula:
V = m * p, where:
V is the desired volume
m is the mass of the body, fluid or substance
p is its density. If the body weight is unknown, then determine it by weighing. Find the density of the substance in the density tables.
The resulting volume will be in litersif the mass is given in grams (g) and the density is in grams per liter (g / l). In other cases, recalculate the volume in liters, using the above instructions.

Helpful advice

Note that the density of water is 1000 g / l or 1 kg / l or 0.001 t / l. Therefore, to calculate the known mass of water in liters, simply:
weight in grams divided by 1000;
multiply the mass in tons by 1000;
weight of water in kilograms take equal to the volume in liters.

There is an aquarium, and how to determine how many liters it?

Sivolobov Sergey

and you count :))))
V = S * h
S = a * b
in other words - multiply the length and width of the aquarium, and multiply by the height,
if you measure in centimeters - you will receive in cubic centimeters
1 liter = 1 cubic decimeter

Sergey Gaidin

simple ruler. or a similar measuring instrument:
length * width * height = cubic centimeters. see cubic / 1000 = liters
This, of course, if he parallelepiped. if round - then the bottle is easier

Svetlana

You can find out the exact displacement of the accident only after a primer, filter, heater, sprayer, caverns / grooves / grottoes, etc., are placed there. That's when you need to count liters, how much is really included. And already from this volume of water to make a start further at settling by small fishes and plants. For example, I have a volume of a small aquarium according to documents of 23 liters, but in reality I pour about 18 liters of water there. So I should be guided when settling it, not with the volume that goes according to the calculations of width and height, or which is written in the passport, but should assume that I have an 18-liter aquarium. And I have to rely on fish for 18 liters, and in no way will I choke on 23 ...

Who knows how to: calculate the displacement of the aquarium, if you know the length, width and height?

User deleted

Express the length, width and height in decimeters (1 decimeter = 10 centimeters), and multiply these three numbers. It turns out the volume in liters.
And if you multiply in centimeters, you get the answer in milliliters! In one liter there are a thousand!

Vadim Nikolaevich

Multiply the length by the width and by 0.95 in height (the aquarium is not filled to the brim). One liter of water is one cubic decimeter. A decimeter is 10 centimeters. So, if the dimensions are in centimeters, then after multiplication you need to divide the result by 1000. You will get liters. For example: 100 cm. X 100 cm. X 100 cm. = 1,000,000 cubic centimeters. Divide by 1000 and get 1000 cubic decimeters or 1000 liters. Thus, a cubic aquarium with a side of one meter holds a ton of water.

How to determine how much a fisherman can be put in a 55 liter aquarium ???

Josef Schweik

For an angelfish, such an aquarium will be small anyway. They need an aquarium of 150 liters, and they need to keep a flock of at least 5 individuals. And the barbs they do not suit as neighbors: they will break off their whiskers, which not only disfigures the scalar, but also leads to their fungal diseases.
If the barbs of Sumatran, scarlet, fiery and similar in size, you can keep 10 small in such an aquarium and 4-5 small pieces when they grow up.
Som soma is different, there are more than 3000 species in total If the soma is small (corridors, calligates, etc.) - 4 pieces are possible. to hold, and if the hotopusternums or bag-laced ones - then the aquarium is too small for them.
Swordsmen can pieces 6.
If you want to keep several species of fish at once, then I would limit myself to a flock of barbs and a pair of small catfish.
Remember that the volume of the aquarium should not only ensure the breathing of fish, but also give them a place to swim.

World

Go to the market. Write down the names of the fish that you like. It is certainly possible to ask the sellers about the extent and with whom they can be maintained, but it is not necessary to be guided by this: the seller’s task is to sell. Come home, scoring names in Google and see how big they grow, how much and with whom they can be kept. You can consult on the forum.
Important points:
1. Temperature
2. The nature of the fish
3. If you choose several species of small fish, then it is advisable to select them by “habitat levels”: bottom (eg catfish), floating in the middle, floating on the surface of the water.

Igor and

The water itself is able to ensure the vital activity of a certain number of fish, a small ...
equipment allows you to increase this count ...
all that more of this falls on your shoulders ... i.e. it is your help of water ...

Pin
Send
Share
Send
Send