Questions

How to make a snag in an aquarium

Pin
Send
Share
Send
Send


Snag in the aquarium - answers to questions, photos and video

Snags in the aquarium, it is beautiful, it is natural and fashionable. Say goodbye to plastic locks and sunken ships, the world of aquarism does not stand still and such things are considered ugly and simply inappropriate. Snags, stones, bamboo, everything that can be found in nature in reservoirs, here is a natural and natural beauty. At the same time, it is not difficult to find, process and make a natural snag for an aquarium. But, you will be amazed at how natural it looks, and it will still be useful for keeping some fish. In this article, we will discuss the benefits of using snags in an aquarium and answer the most popular questions.

Why do we need a snag in an aquarium?

It not only looks great, but also stimulates and maintains a healthy ecosystem inside the aquarium. Just like the soil and the contents of the filters, the snag serves as a medium for the development of beneficial bacteria. These bacteria are very important for balance in an aquarium, they help decompose harmful substances into safe ingredients.

Snags help to strengthen the immunity of your fish. Submerged snags slowly excrete tannins, which create a weakly acidic environment in which harmful bacteria and viruses develop much worse. Fallen leaves act in the same way, they are often added to the bottom of the aquarium, and which make the water in natural ponds the color of strong brewed tea.

If you have alkaline water, the addition of driftwood helps lower the pH. Most of the fish in nature live just in the water slightly acidic, and driftwood with fallen leaves in the aquarium, perfectly help to recreate such an environment.

Snags recreate the natural conditions for fish. Practically in any reservoir, as if a lake or river, you can always find a sunken snag. Fish use them as shelters, for spawning or even for feeding. For example, antsistrusam, it is necessary for normal digestion, scraping layers from it, they stimulate the work of your stomach.

Where to get a snag for an aquarium?

Yes, anywhere, in fact, they just surround us. You can buy it on the market or in the pet store, you can find it in the near pond, fishing, in the park, in the forest, in the neighboring yard. It all depends on your imagination and desire.

Which snags can be used? What are suitable for an aquarium?

The first thing you need to know: snags of conifers (snags of pine, if cedar) is highly undesirable to use in an aquarium. Yes, they can be processed, but it will take 3-4 times longer and the risk remains that they are not fully processed.

Second, you need to choose deciduous trees, preferably solid: beech, oak, willow, grapevine and grape roots, apple, pear, maple, alder, plum. The most popular and strong will be the willow and oak snags. If you stop on softer rocks, they will quickly fall apart and in a few years you will need a new one. You can buy natural driftwood from outside our countries: mopani, mangrove and ironwood, the blessing is their choice in stores now. They are quite solid and well preserved, but there are also drawbacks that the mopani, that mangrove snags can paint water very much, so that no soaking helps.

Snag mopani

Is it possible to use live branches?

No, you can not use live branches, you only need a dry tree. If you like some kind of branch or root, then it is easier to cut it down and leave it to dry in a well-ventilated place, or in the sun, if it is summer outside. The process is not fast, but does not require any attention.

How to prepare a snag for an aquarium?

If there is rot or bark on your chosen snag, then it must be removed and cleaned well. In any case, the bark will fall off over time and will spoil your view of the aquarium, and rot can lead to more sad consequences, even to the death of fish. If the bark is very strong, and is poorly removed, then the snag needs to be soaked or removed after boiling, it will be much easier.

How to make an aquarium snags?

It's all up to your taste. As a rule, large, textured snags are noticeable. World-class aqua-designers most often use tree roots, since they have a rich texture and there is a single point of growth from which roots come out. Often, when the first time you take a snag in your hands, then simply twisting it, you lose where it will look more beautiful. But you can still use stones, bamboo, plants. If you have no experience in this matter, you can simply try to reproduce what you see in nature, or repeat the work of some other aquarist.

How to cook a snag for an aquarium? How to prepare it?

Aquarium is a very sensitive to the environment environment, the slightest changes in which affect all its inhabitants. That is why it is necessary to properly treat the snag before putting it into the aquarium. In our case, in addition to cleaning bark and dust, natural snag is also boiled. What for? Thus you kill all the bacteria, germs, insects, spores that live on the log, and during the process of cooking various substances are released. The second reason is that dry snags do not sink in water, and they either need to be fixed, or boiled in water with salt, then they begin to sink.

So, if the snag is in the tank, then just take the salt, about 300 grams per liter, pour it into the water and boil the snag for 6-10 hours. Do not forget to add water to replace evaporated. Check whether it sinks, and if not, then we continue the process. By the way, the snags that you found in the river are already drowning, and you do not need to boil them with salt, it is enough to boil for 6 hours. And yes, if you bought a snag at a pet store, if you still need to cook. By the way, do not take snags for reptiles, they are often treated with fungicides, and your fish will not like them.

Snag colors the water, what to do?

Technically, after boiling, a snag can be added to an aquarium, but as you already know, snags release tannins into the water. It is very desirable, after you boil it, put it in water for a couple of days. During this time, you will see if it paints water. If it is slightly colored water, then this is normal and acceptable, but there are varieties that bring the water color to literally brown. In this case, the recipe is one - soak the snag, preferably in running water or in water that is often replaced. How long it takes depends on the type of wood and its size, but this should be done until the water becomes light enough. It is possible to speed up the process and boil it again.

If the snag does not fit?

Then it is either cut into several parts, and then fastened back, or boiled by dipping different parts into boiling water alternately. If your snag is very large, then you can pour boiling water over it and place it in the aquarium, flooding it with the help of cargo. But, remember that in this case, you risk quite strongly, as bacterial outbreaks can be, so any filth that affects your fish.

How to fix or drown the snag?

Best of all, of course, boil it to a state of negative buoyancy. If it is impossible to do this, for example, the snag is very large, and does not sink in an aquarium, then it is heated or fixed. The main thing you need to know is that you cannot rest the snag on the walls of the aquarium and thus fix it, that is, wedge it in the aquarium. The fact is that wood will swell and expand. And what can this lead to? Besides that she just squeezes out the glass in the aquarium. Why doesn’t snag in an aquarium? Dry is simple, even if you boil it. In the middle it can be as dry as it was.

How to fix a snag in an aquarium is up to you. The simplest thing is to use the line to tie it to the stone. For example, I just secured a heavy stone, jamming it between the roots. Someone attaches a plank from below and then simply buries it in the ground. You can use suckers, but this method is unreliable, as they stick out, and your snag catapults upwards, which can have dire consequences.

On the bark appeared white bloom and it was covered with mold or mucus? What to do?

If such a raid appeared in the aquarium immediately after you have loaded a new snag, then that's okay. Usually it is white mucus or mold, which is not dangerous and catfish antcistrus will eat it with pleasure. If you do not have such catfish, then simply rinse under running water.

But if the snag in your tank for a long time, and suddenly there was a raid on it, then you should take a closer look. Perhaps the wood is rotten to the lower layers, where rotting has gone faster and more dangerous.

Dimmed water and hydrogen sulfide stinks after adding driftwood?

It rots a snag in an aquarium. Most likely you used an undersized snag. It must be removed and dried well, if a little can be done in the oven.

Detailed video about creating a scape with a snag at the base (English subtitles):

How to attach the moss to the snag?

Very often moss is attached to a log in an aquarium, for example, Javanese or other plants on snags in an aquarium. It looks amazingly beautiful. But many do not know how to properly attach the moss. There are several options: a cotton thread, after a while it will rot, but the moss has time to attach to the bark with the help of rhizoids. If you need a more reliable option, you can use a fishing line, it is generally forever. Some moss just ... stick with superglue. However, this method is much more convenient, but there is a risk of poisoning the water with the toxins contained in the glue.

Is the snag in the aquarium darker?

This is a natural process, even the snags of light tones darken with time. You can peel off the top layer, but this will only help for a while. Simply leave it as it is.

Is the snag in the aquarium green or green?

Most likely the case in algae, which covered its surface. They cover the glass in the aquarium and the stones look like green dots on the glass. You can get rid of them simply by reducing the length of daylight and the power of lighting. Excessive light in the aquarium is the cause. Well, just clean the snag by removing the top layer from it.

How to prepare a snag for an aquarium?

Snags in the aquarium look beautiful and natural, if properly prepared. All that is required is to find a natural branch or root of a tree in a natural pond, process them and put them in water. This decoration has useful properties that will lead to the balance of the aquatic environment inhabited by fish. Snags for an aquarium maintain a healthy equilibrium of the ecosystem, they develop beneficial microorganisms.

Beneficial features

Snags will help strengthen the immune system of fish. Flooded fragment of wood gradually produces tannins, which form a weakly acidic microflora, creating an obstacle to the development of pathogenic bacteria. Also useful are fallen leaves of trees that can be laid out on the bottom of the tank. They paint the water, giving it a slightly brown tint.

See how to make an aquarium with the help of kryag.

Snags for aquariums can lower the pH of the water. As you know, many freshwater fish live just in the water slightly acidic. Recreation of the conditions of the natural biotope is useful for the life and health of pets. A sunken snag of wood can be found on any body of water - in a river, lake or in a pond. Wooden decorations are used as places for sheltering fish and their fry, in some cases they form a feeding environment for pets. Ancistrus cannot live without wood, they collect a layer from its surface that helps digestion.

What are suitable snags

How to prepare a snag for an aquarium? Very simple, if you find exactly the one that would be most suited to the size of the tank. In the forest areas, near the shores of water bodies, large samples are often found. Snag for aquariums can be bought at the pet store or on the market. Wood from pine needles (spruce, pine, cedar) is not suitable for an aquarium. It can be processed, but the process will be long. Resins that produce coniferous trees can be detrimental to the health of fish. How long do I need to process the needles? More than 10-12 hours.

It is recommended to install a snag in an aquarium of deciduous trees: beech, oak, willow, apple, pear, maple, alder, plum, vine. A snag for hardwood aquariums (willow and oak) would be the most suitable option. Soft wood will quickly fester and decay, and only spoil the water.

You can buy a snag for aquariums from foreign tree species - mangroves, mopani, ironwood. Mopani has a significant drawback - it paints water strongly, but it is hard and long stored. It is undesirable to use live branches of trees, only dry wood is useful. It is possible to dry a felled twig in the sun, if the air temperature and lighting allow.

How to process wood

How to make a snag for aquarium? If you accidentally notice a rotten area or rotting bark on a tree, it is recommended to remove it immediately. The bark of the tree is still peeled off and disappears, and rot will spoil the composition of the aquatic environment. If spoiled bark is difficult to remove, but for the beginning it is better to boil it. How long to boil? It may take several hours, then it will soften and easier to remove.


Since dry snags weigh easily and float to the surface of the water, they need to be soaked in a solution with salt and boil so that they can sink. For this you need 300 grams of salt. It should be added to water in proportions of 1 liter. How much time to digest? Perhaps more than 8-10 hours. When the water evaporates, you need to add new water. Then check if the tree is sinking - if not, continue to boil it. Purchased snag should also be processed in a similar way. Buy special roots and wood for fish, not treated with chemicals.

See how to prepare a snag for an aquarium.

Causes of water staining

If the water paints a new snag in the aquarium, then it produces dye tannins. They are harmless, but they will change the parameters of water. A tree does not paint a pond if it is dipped in boiled water for a few more days. Observe at this time whether the water continues to change its color. If the color colors a little water, it is a natural process. When he paints her in a rich brown color, then wood should be soaked for several more days. How many days it will take depends on the type of wood and its size, but making quality material requires patience.

How to install

A snag for an aquarium is easily fixed with its own hands if it is well cooked. When it is impossible to do this, you have to resort to other actions - to flood it or to push it to the bottom. It is not recommended to put a snag in an aquarium in a corner - there the tree will swell and increase, squeezing out the glass.

To aquarium aquarium can be attached with a string, attached to a stone. It is also possible to bury it in the ground, or use suckers, but this method is not very reliable. Sometimes a moss is attached to the aquarium cage, which over time will grow itself with the help of rhizoids.

Changes in water and wood in an aquarium

When using poor-quality material, water will start to emit an unpleasant smell. Then the snag is removed from the tank, dried in the air or in the oven. Sometimes snags paint a pond in a dark color - this is a consequence of the natural process, when tannic dyes stand out. If the snag itself darkens, it can be cleaned, but it is advisable to leave it and see if it has begun to rot.

In the event that the water began to turn green - this is a signal for the development of green algae. They are not dangerous, but sometimes accumulate heavily, spoiling the appearance of the tank. In order to avoid landscaping, it is better to reduce the number of daylight hours, because cyanobacteria develop with abundant lighting. The wood can be removed for a while from the aquarium, and cleaned with a scraper.

All about snags for aquarium

A considerable number of aquarists today prefers aquarium kryagam. With their help, the aquarium becomes a particularly cozy one: plants are planted on them, they are used especially for small fish (as a shelter), etc.

Some buy snags in stores, and some decide to create them with their own hands. With the purchase, everything is quite clear, though, then you need to properly prepare the purchased snags. Therefore, in this article we will talk about these issues in more detail.

To begin, consider the process of self-manufacturing snags.

Do it yourself

Before you start creating an aquarium snag with your own hands, you need to find out what tree species you can use to decorate your aquarium.

Note that the most popular among all the trees are mangrove and mopani. However, these trees have one peculiarity: when they are placed in an aquarium, a slight tinting of the water in amber color is possible. To prevent this, you will need to pre-wash the stump with ordinary running water (about ten minutes will be enough).

But it is not at all necessary to select only the named two tree species. Other options are possible, with the exception of coniferous trees. We recommend that you choose an apple, pear or nut. Но самый идеальный вариант - это ива. Как известно, значительная часть этих деревьев растет на берегах водоемов. Из этого следует, что древесина у ивы в максимальной степени приспособлена к содержанию в воде. Аквариумная коряга из ивы будет выглядеть весьма органично.

Определившись с породой дерева, нужно подыскать подходящую корягу. Searches can be carried out in the river, for example, or in a swamp.

If you did not manage to find the snag in any reservoir, then you can easily cut it with your own hands. For cutting, you need to find a suitable part of the tree: it should be interesting, have a large number of twigs. In doing so, you must, of course, take into account the size of your aquarium. When searching, we advise you to pay attention to the most dry trees, from the bottom of which you can cut down snags.

Preparation of snags

Since we are talking about making aquarium snags with our own hands, its preparation is of great importance. In the event that you use the snag found in the pond, the preparation will be as simple as possible. The fact is that a snag that has been in water for a long time is, say, “tempered” and may be contained in water. Consequently, it only needs to be cleaned from dirt and foul places. After cleaning the snag will need to boil. For this purpose, it is necessary to prepare a special solution of saturated salt: pour water to the log completely and sprinkle salt without sparing. Salt should be a lot, then you get an extremely concentrated solution.

Once the salt is completely dissolved, boiling should begin. It should last about 3-5 hours. At the same time, it is important that the dishes, in which a piece of wood is boiled, should be either enamelled or made of stainless steel. At the end of boiling, the snag will firstly become dark, and secondly, it will be completely disinfected.

But the aquarium decorations in question after boiling are not quite ready. They will need to be placed in clean water, and on top of them it is desirable to put some heavy object (to drown the snag).

Finally, a snag will be ready in about two or three days. Thus, we see that preparing aquarium accessories such as snags is quite simple. To do this, do not need special skills, knowledge, skills. Just need diligence and time.

But then the decoration you have prepared will be a great place where you can place plants, for example. By the way, it has become fashionable to plant the plants on a bark just recently. But we'll talk about this below.

We fix the snag

If you just need to put the snag on the bottom of the aquarium, then lightly dig it in the ground. But if there is a need to put a snag or firmly fasten in one particular place, then attention should be paid to the method of fixing.

There are three main ways:

  • With stainless steel screws;
  • Through the suction cup;
  • With the help of fishing line.

The choice of a particular method is a matter of taste. It is only important that:

  • The mount was extremely durable. A large snag that has broken loose from the mount can break aquarium glass, light bulbs or a cover;
  • also mount should not be a danger to fish.

Little about plants

As we have already noted, aquarium plants are often planted on snags. Indeed, this is one of the newest trends in aquarism.

So what plants can be planted? There are a lot of options, but we note that moss is most often used. Also should be called plants such as ferns and anubias.

Choosing a particular representative of flora, you need to fix it. As a rule, plants are attached using cotton thread. At the same time note: before the final binding, make sure that the thread is not overtightened, but tied tightly enough.

As we see A snag for an aquarium can be made with your own hands. The process as a whole is creative, and therefore it will certainly be fascinating for you. Successes!

A snag for an aquarium do it yourself photo video description.

Snags for aquarium

Snag on the bottom of the aquarium, of course, make the interior decoration of the aquarium more attractive. As a rule, it is a dead, water-saturated part of the tree. Therefore, unlike living shoots, the snag immediately sinks into the water and does not need to be anchored.

It will remain lying in one place until its owner or its underwater inhabitants are moved. Each snag has a unique shape, so it can be used to create the most bizarre structures. What tree to make a snag for an aquarium? If the reader is going to use snags from trees that grow near his house, then we can recommend species with dense wood (oak, maple, ash, elm, hazel). Pine, spruce or larch have loose wood, so they will quickly rot and form a lot of bacterial plaque in the aquarium.

In addition, they contain resins, the effect of which on hydrobionts is unknown. It is worth considering that walnut, red oak, cherry and other trees with dark wood emit a lot of tannins. They can be useful to aquarists who contain South American cichlids. Depending on the origin, there are several types of koryag. All of them are formed from the branches and trunks of various tree species as a result of rotting under water or wind erosion and abrasive sanding on land. Snags, which belong to the species of trees of European forests, are usually characterized by simplicity of shape and small size.

In some cases, they have good buoyancy, and therefore need to be drowned. The first method of sinking is tying weights. Over time, up to a week for small branches and a few months for large drifts, they lose their buoyancy. A faster method involves drilling multiple holes, which are then filled with silicone or metal objects (bolts). The roots of the African savannah. Also a very common type of snag.

These roots drown themselves. They do not look like ordinary snags, because gnarled on one side and smooth on the other. Malaysian wood is harvested in the mangrove forests of southeast Asia. It looks like ordinary snags, but it sinks on its own and has elongated, dark branches. Mangrove snags strongly dye the water dark and reduce the pH of the medium. This does not necessarily harm the inhabitants of the aquarium, because some tetras and dwarf cichlids, by contrast, prefer sour-colored water.

Reddish and brownish wood driftwood from Desmodium unifoliatum. Straight from Vietnam for 10 bucks per kilogram (ill. Alibaba.com) Mangrove snags from Malaysia (ill. Penangseagarden.com) Dried Malaysian lianas (ill. Alibaba.com) Snags made from Mopane wood are often sold under the name African Wood. Do not confuse Mopane wood with savanna roots. It looks like an ordinary snag, but it sinks on its own.

The dried trunk and branches of Mopane have ribbed appearance, cavities and dark color. The age of African wood is usually over 100 years old, so it is expensive. Although less so than Malaysian, African wood lowers the pH of the water.

If you need to avoid this, snag boil. Snags Mopane "Do not boil, make people laugh!" (WhiteDevil; Ill. Aquariumadvice.com/forums) That's better. Mopane Coarse Aquarium (Ill. David Raynham, Flickr) Wood with overgrown is not a special type of wood. It is formed naturally, in the course of fouling of snags with aquatic plants, or aquarists specifically create it by implanting Anubiasa bushes or Javanese moss.

The coconut shell also belongs to wood, although hardly anyone has enough imagination to call it a snag. However, in this article it is worth mentioning the shell. It is usually used in the creation of single submarine cave or substrate for spawning. The parameters of water shell practically does not affect.

Pluses snags in the aquarium

  • Complete look and unique design of the aquarium.
  • Additional places for recreation, games, hide your pets, and in some cases and for spawning.
  • Soften water by increasing its acidity naturally. Most fish, especially freshwater, live in nature in open reservoirs with trees growing along the shores. The branches and leaves fall into the water and lie there for years and decades, creating the optimal composition of water and the conditions for the life of its inhabitants.
  • Prevention of diseases of the digestive tract in some species of fish (for example, catfish) due to their eating of wood fibers.
  • The possibility of increasing the ornamental aquatic plants and moss.
  • Creating an environment unfavorable to harmful bacteria and microorganisms (treated wood emits small amounts of tannins and tannins, which disinfect water, but are safe for fish) and lightly dye the water in pleasant brownish-golden hues (if you don’t want it, you can choose a tree species, which will leave the water clear).

    SEWN COATING WATER, WHAT TO DO?

    Technically, after boiling, a snag can be added to an aquarium, but as you already know, snags release tannins into the water. It is very desirable, after you boil it, put it in water for a couple of days. During this time, you will see if it paints water. If it is slightly colored water, then this is normal and acceptable, but there are varieties that bring the water color to literally brown. In this case, the recipe is one - soak the snag, preferably in running water or in water that is often replaced. How long it takes depends on the type of wood and its size, but this should be done until the water becomes light enough. It is possible to speed up the process and boil it again.

    WARMED WITH WATER AND STOMEN WITH HYDROGEN, AFTER ADDITIONAL SEAF?

    It rots a snag in an aquarium. Most likely you used an undersized snag. It must be removed and dried well, if a little can be done in the oven.

    IF YOUR DROP DOESN'T VLAZIT?

    Then it is either cut into several parts, and then fastened back, or boiled by dipping different parts into boiling water alternately. If your snag is very large, then you can pour boiling water over it and place it in the aquarium, flooding it with the help of cargo. But, remember that in this case, you risk quite strongly, as bacterial outbreaks can be, so any filth that affects your fish.

    HOW TO ATTACH THE MOSS TO THE TRAY?

    Very often moss is attached to a log in an aquarium, for example, Javanese or other plants on snags in an aquarium. It looks amazingly beautiful. But many do not know how to properly attach the moss. There are several options: a cotton thread, after a while it will rot, but the moss has time to attach to the bark with the help of rhizoids. If you need a more reliable option, you can use a fishing line, it is generally forever. Some moss just ... stick with superglue. However, this method is much more convenient, but there is a risk of poisoning the water with the toxins contained in the glue.

    DIRT IN AQUARIUM DECAY?

    This is a natural process, even the snags of light tones darken with time. You can peel off the top layer, but this will only help for a while. Simply leave it as it is.

    DROPPED IN AQUARIUM GREEN OR GREEN?

    Most likely the case in algae, which covered its surface. They cover the glass in the aquarium and the stones look like green dots on the glass. You can get rid of them simply by reducing the length of daylight and the power of lighting. Excessive light in the aquarium is the cause. Well, just clean the snag by removing the top layer from it.

    What kinds of fish need snag?

    Of course, any fish will be more fun, and the owner is more interesting to watch pets if the snag becomes part of the interior of the aquarium. But there are certain types of fish that snag just needed.

    Thus, various types of catfish use scurf, which forms on the surface of the snag, as an additional feed, and the thinnest upper layers of wood - as a source of dietary fiber. These are such fish as Panak, Orinok catfish, catfish Ancistrus, cuckoo catfish.

    Many fish that in natural conditions prefer to spawn in the roots of fallen trees in the water, old snags, gladly do the same in artificial environment. This is a large group of fish of the perch family (gourami, glass perch).

    Long and narrow fish of the order of moray eels and eels will also be grateful to you for a labyrinth of roots or small spreading snags and for safe shelter.

    It is necessary to observe special care when choosing the size of koryag if you keep very active or aggressive fish (some types of cichlids, for example), because such pets prefer rocky, stone bodies of water and can cause themselves harm, injuring themselves with vigorous movement and fights on protruding edges.

    But here it is enough to follow a simple rule: there should be a little kryag, they should not occupy a large space and have sharp protrusions. It is better if it is one large uncomplicated and smooth piece of a large branch, without processes.

Choosing and correctly preparing snag: stages

Careful choice

No sane person will put in his first stick in the aquarium. This will instantly destroy the eco-balance and destroy all living things. The choice of snags is one of the key stages, if not the most important, and a number of conditions must be taken into account.

Snag can be bought at the pet store. It is the easiest, but sometimes demanding considerable financial expenses. The most commonly sold snags of overseas wood species: mangrove, mopani.

However, such snags strongly shade the water, sometimes giving it the color of rich tea leaves. When transporting, they catch a lot of harm to the fish, so even the purchased snag will need to be treated and soaked to eliminate these problems.

And if you are not a wood connoisseur, be careful: unscrupulous vendors may offer you the usual local sludge under the guise of an overseas tree, especially in bird markets.

Therefore, it is safer and cheaper to make such a useful decor by yourself.

For an aquarium, the branches and the roots of hardwood trees, willow, apple, and pear, which have lain for a long time in water, are ideal. It is categorically not recommended to use coniferous species - spruce, pine, juniper.

A copy you like you need to carefully examine: too rotten and rotten snags, which simply crumble from the slightest pressure, do not fit.

The wood must be hard, preferably already with beetle and worm grooves - they destroy biological components that can harm the fish. Live branches can not be used.

With a suitable snag, you need to immediately remove all rotted parts, moss, algae and bark.

Preparation and processing

At home, the snag must be thoroughly cleaned, remove the remnants of the bark, so that it remains completely naked. No matter how beautiful the bark looks by itself, in the aquarium it will surely start to rot, and the fish may get hurt on the pop up pieces.

Then wash the snag under running water and place for some time (30-60 minutes) in a strong brine. Salt strewed until it ceases to dissolve. In this solution, you will then cook it.

Boil snags on low heat, in an enamel or stainless cookware (aluminum is not suitable) for two or three days. The minimum is considered a period of 12 hours, but in this case more is better than less.

Duration also depends on the thickness and size of the snags: some simply do not fit in the pan, so they have to be turned every few hours for steaming all areas, a priori, you need to cook longer. During cooking, add water as needed, as it will evaporate.

For additional disinfection you can add a little potassium permanganate, it will also give the wood a noble dark color.

After boiling the snag is left under running water (from under the tap) with water or placed in a basin or bath with frequent water changes for another week. This is done to remove any salt residues that the snag managed to absorb during cooking. In addition, as a snag is saturated with liquid and in most cases begins to sink.

Before diving into the aquarium, be sure to check if it comes to the surface. After that the snag is thoroughly dried and again checked for buoyancy. Some instances still retain the stubborn ability to float. In this case, the snag will have to be fixed at the bottom of the aquarium.

Also pay attention to the degree of staining of water: a light brownish tint is likely to go away in a few days or water changes in the aquarium. Strongly painting snag needs to be soaked again until it stops toning the water.

Preventing decay

Even after careful processing, there is a risk that rotten or living areas remain inside the snags, which can begin to rot in the aquarium. Therefore, experienced aquarists use 2 ways.

1. Roasting The snag is slightly burned with a blowtorch, either over the entire surface or only from suspicious ends, then placed in water for 2-3 days, periodically wiping the charred areas with a napkin and removing soot.

2. Paraffin. Some for absolute safety pour the entire area of ​​the snag with a thin layer of melted paraffin. This is undoubtedly the most reliable way to prevent any undesirable components from escaping from the tree into the aquarium water.

Anchorage in the aquarium

The easiest way if the snag has ceased to float. Then you can just put it on the bottom and secure with soil. But often the snag does not want to lie down and rises to the surface of the water. This can be dangerous for residents of the aquarium.

Существует несколько вариантов укротить непокорную:

  • Леска. Можно привязать к коряге леску, а другой конец либо придавить в грунте камнем, либо привязать к нему груз.
  • Присоска. Вариант лёгкий, но ненадёжный. Со временем любая присоска отвалится от поверхности. Некоторые идут на крайность и приклеивают присоску либо саму корягу напрямую клеем к стеклу: так делать крайне опасно для здоровья рыб - химикаты остаются химикатами.
  • Шурупы из нержавейки. The method is reliable, especially if you make for the snag the base of the treated piece of wood, plexiglass, stone and secure with soil. But here it is important how the quality of the nails or screws corresponds to its name and whether they will rust. If you are not sure, you can fill the attachment points with special silicone that is safe for fish.
Whichever way you choose, remember that you should never fix a snag on the walls of an aquarium - it will swell over time and can squeeze or break glass.

Ornamental plants and moss

If you wish, you can add different types of moss and plants to the root snag, which will give your homely reservoir the look of a real corner of wildlife.

Designer inspiration to you, and always remember the safety of your choice for pet aquarium!

CO2 FOR THE AQUARIUM WITH OWN HANDS PHOTO VIDEO DESCRIPTION.

REAR BACKGROUND FOR AQUARIUM PHOTO VIDEO DETAILED DESCRIPTION.

COVER FOR THE AQUARIUM OWN HANDS PHOTO VIDEO.

Snag in the aquarium do it yourself without boiling

Preparing the snags for the aquarium

how to make a snag for aquarium PART №2

how to prepare a snag for aquarium

Pin
Send
Share
Send
Send